Changing The Recording Track While In Record Standby; Recording Keyboard Play Along With A Song Lesson - Casio CT-X800 User Manual

Table of Contents

Advertisement

Changing the Recording Track
while in Record Standby
To change the recording track
• When you want to easily record to a new solo track (For
example, to record drums first, etc.)
• When you want to correct for selection of the wrong track
for recording
1.
Hold down bp RECORD/STOP.
This causes "Rec Trk" to appear on the display.
2.
Use the ct number keys, and the dk [–] and [+]
keys to select the track you want to record.
3.
Press the ct [5] (EXIT) key.
If you want to start playback of a previously recorded
track and record new keyboard play along with it, press
8 PLAY/STOP and then play along with the playback.
To change the song number
• To easily select a different song number for recording while
in record standby
• When you want to correct for selection of the wrong song
number
1.
Hold down bp RECORD/STOP.
This causes "Rec Trk" to appear on the display.
2.
Use the ct [2] (o) and [3] (p) keys to select
"MltRec 1".
3.
Use the ct number keys, and the dk [–] and [+]
keys to select the song number of the song
you want to record.
4.
Press the ct [5] (EXIT) key.
If you want to start playback of a previously recorded
track and record new keyboard play along with it, press
8 PLAY/STOP and then play along with the playback.
Recording Keyboard Play Along
with a Song Lesson
This section explains how to play along and record along with
one of the Digital Keyboard's songs. Recorded content is
saved in Song Bank location 171.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, tempo, reverb setting, octave shift setting,
pedal operations, pitch bend wheel operation,
pitch bend range setting
• There can be only one recording of keyboard play with a
song in recorder memory. Making a new recording replaces
(deletes) previously recorded data.
1.
Press bn SONG BANK.
2.
Use the ct number keys, and the dk [–] and [+]
keys to select the song number of the song
you want to record.
3.
Press 9 PART SELECT to cycle through the
parts in the sequence shown below.
• Configure tone and tempo settings at this time as well.
Recording Your Keyboard Play
Song playback
Disappears
Right hand recording
Lights
Left hand recording
Lights
Both hand recording
Lights
EN-41

Advertisement

Table of Contents
loading

Table of Contents