Table of Contents
Advertisement
4
Put your hand on the ADF release tab, and push it
up to open the ADF.
5
Gently wipe the print head by using a cloth
moistened with Cleaner F1.
If you use a large quantity of Cleaner F1 at once, it
！
！ ！
will take a long time to dry. Make sure to moisten the
cloth with an appropriate quantity of the cleaner.
Also, make sure to wipe off the cleaner completely
with a soft lint-free cloth and leave no residue on the
surface of the cleaned parts.
6
Hold the ADF with both hands and press it down
slowly.
Push the ADF until it is securely locked in place.
When closing the ADF, be sure nothing is left
！ ！
！
inside.
Be careful not to get your fingers caught.
7
Put the hopper back up.
8
Reinstall the print cartridge.
(Refer to "2.5 Replacing the Print Cartridge" (page
16).)
■ Back-Side Imprinter
1
Make sure that the scanner power cable is
unplugged from the outlet.
2
Remove the print cartridge.
(Refer to "2.5 Replacing the Print Cartridge" (page
16).)
3
Push up the top cover release tab with your fingers
to open the top cover.
4
Gently wipe the print head by using a cloth
moistened with Cleaner F1.
If you use a large quantity of Cleaner F1 at once, it
！ ！
！
will take a long time to dry. Make sure to moisten the
cloth with an appropriate quantity of the cleaner.
Also, make sure to wipe off the cleaner completely
with a soft lint-free cloth and leave no residue on the
surface of the cleaned parts.
5
Hold the top cover with both hands and press it
down slowly.
Push the top cover until it is securely locked in
place.
When closing the top cover, be sure nothing is
！
！ ！
left inside.
Be careful not to get your fingers caught.
6
Reinstall the print cartridge.
(Refer to "2.5 Replacing the Print Cartridge" (page
16).)
21
Advertisement
Table of Contents
