Table of Contents
Advertisement
6
Remove the new print cartridge from its pouch.
7
Remove the protection tape.
Do not touch the metal part of the cartridge nor put
！
！ ！
the tape back again.
8
Insert the print cartridge into the print cartridge
holder.
Insert the print cartridge with the tab on the right
！
！ ！
side.
Make sure that the print cartridge does not touch
or get caught in the flat flex cable.
9
Gently close the print cartridge holder cover on the
right side until it is locked, to fix the print cartridge.
10
Align the top of the print position pointer with the
print position mark where printing should be
performed on the document.
(Refer to Step 3 onwards of "Front-Side Imprinter"
(page 14) in "2.3 Positioning the Print Cartridge".)
When setting a print cartridge, align the top of the
！ ！
！
print position pointer with the print position mark
where printing should be performed on the
document. Otherwise, printing may not be
performed properly, or the document may be
smudged with ink.
Tab
11
11
Perform a test operation.
(Refer to "2.2 Operating Test" (page 13).)
Advertisement
Table of Contents
