Remove The S-Board; Remove The K-Board; Remove The Plasma Panel Section From The Cabinet Assy (Glass) - Panasonic TH-42PV7AZ Service Manual

6.15. Remove the S-Board

1. Remove the screws (×2
frame.
2. Disconnect the connector (S1).
3. Remove the screws (×2

6.16. Remove the K-Board

1. Remove the S-Board. (See section 6.15.)
2. Remove the stand brackets (See section 6.11.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (K1).
5. Remove the screws (×3
) and remove the S-Board metal
) and remove the S-Board.
) and remove the K-Board.
TH-42PX7A / TH-42PV7AZ / TH-42PV7HS / TH-42PV7M / TH-42PV7MR
6.17. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×3
each).
3. Replace the servicing stand and stand the set.
4. Remove the cabinet assy and the plasma panel fastening
screws (×7 ).
13