Remove The Ss-Board; Remove The Stand Brackets; Remove The C1-Board; Remove The C2-Board - Panasonic TH-42PV7AZ Service Manual

TH-42PX7A / TH-42PV7AZ / TH-42PV7HS / TH-42PV7M / TH-42PV7MR

6.10. Remove the SS-Board

1. Disconnect the connectors (SS11, SS12, SS23 and SS34).
2. Disconnect the flexible cables (SS53A, SS54A, SS55A and
SS56A).
3. Remove the screws (×6

6.11. Remove the stand brackets

1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×6
each) and remove the stand brackets (left, right).
) and remove the SS-Board.

6.12. Remove the C1-Board

1. Remove the tuner unit. (See section 6.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×4

6.13. Remove the C2-Board

1. Remove the tuner unit. (See section 6.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (×4

6.14. Remove the speaker L, R

1. Disconnect the connector (DG12). (See section 6.4.)
2. Remove the screws (×4
L, R.
12
) and remove the C1-Board.
) and remove the C2-Board.
each) and remove the speaker