Stereo / Dual Sound Reception (Atv Mode); Speaker Sound Output Selection (Dtv Mode) - JVC LT-42C550 Instruction Manual

Balance
Adjusts the relative volume of the speakers in a multiple speaker system.
Auto Volume
Volume levels are automatically controlled (e.g., advertisements tend to be louder than the
programmes).
DTS TruSurround
DTS TruSurround delivers an immersive virtual surround sound experience over front facing
speaker configurations, complete with rich bass, high frequency detail and clear dialogue.
Press the OK button to select On / Off.
AD Switch
Audio Description is an auxiliary audio function that provides an additional audio track
(for DTV mode) for visually challenged persons. This function handles the Audio Stream for the AD (Audio
Description), when it is sent along with the main audio from the broadcaster.
• Set to "Off" for normal broadcasting sound coming out from speakers.
• Set to "On" to activate the description sound track if available. Press the
Digital Audio Selects the digital audio output mode. Press the OK button to select PCM / Auto.
Output (Optical)
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.

Stereo / Dual Sound Reception (ATV Mode)

When a programme is selected, press the AUDIO button to display the sound information for the selected station.
Broadcast
Mono
Stereo
Dual
Mono sound selection
If the stereo signal is weak, you can switch to mono by pressing the AUDIO button. In mono reception, the clarity of sound is
improved. To switch back to stereo, press the AUDIO button again.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to NICAM DUAL I, NICAM DUAL II, NICAM
DUAL I+II or MONO by pressing the AUDIO button repeatedly.
NICAM DUAL I Sends the primary broadcast language to the loudspeakers
NICAM DUAL II Sends the secondary broadcast language to the loudspeakers
NICAM DUAL I+II Sends the primary and secondary broadcast languages to the
loudspeakers

Speaker Sound Output Selection (DTV Mode)

While watching a DTV programme, you can press the AUDIO button to
display the audio language list (only applicable when the TV programme has
this feature).
Press the buttons to select an audio language or audio format if
available and then press the
L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to
confirm and exit.
adjust the AD volume. The availability of Audio Description sound track is indicated by the
visually impaired icon "V.I." in the information banner.
On Screen Display
MONO / NICAM MONO
MONO / NICAM STEREO
MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II
buttons to select sound track between
Customising TV Settings
buttons to
Audio Language
English
MPEG L R
Norsk
MPEG V.I. L R
OK
5
33