Table of Contents
Advertisement
QuickView
button allows you to go back to the last selected
TV channel.
•
This feature is not available in external input mode and
also it can not step over the ATV-input mode and DTV-
input mode.
MUTING
Press
. The sound will be cut off.
The muting can be released by pressing
+ or –.
Still picture
Press FREEZE to make a still picture. To cancel the still
picture, press FREEZE again.
Note:
•
During still picture mode, PICTURE SIZE feature is
not available. (If you press PICTURE SIZE, still picture
mode will be canceled.)
•
If you performed the still picture function in DTV-input
mode, this function works with also the external output
signal from SCART socket.
Note:
•
During TV or external input mode (except PC input
mode), if there is no signal reception, the TV will change
to standby after approx. 15 minutes (in PC input mode:
2 minutes).
•
Some functions are activated and de-activated with
the same button. Others require RETURN button for
de-activating.
Teletext
Teletext is sent page by page. This unit is able to
automatically store up to 800 pages, but they can
only be accessed once they have been stored. This
can take a few moments.
The Teletext language menu allows the installation of
the teletext language.
The languages displayed are only those supported
by the channel.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special directory.
On the lower part of the screen there are four different
coloured fields (red, green, yellow and blue). These fields
lead directly to the pages shown within. The coloured
buttons on the remote control correspond to the coloured
fields. Press the appropriate coloured button in order to
activate the desired colour field.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press
. You will now see a teletext page.
(If "100" is shown without any text information, it may mean
that the channel you have selected does not support
teletext.)
Press
again. The TV-screen will be split into two and
both Teletext information and actual broadcast will be
displayed at the same time.
Press
again in order to switch off teletext.
Press
again in order to switch on teletext again. The
last page which was stored is now shown.
Note:
•
You cannot select any other channels as long as teletext
is switched on. Switch teletext off when you want to
switch over to another channel.
14
Select Page
Press P + or – until the page you desire appears. Or
... enter the requested page number by using the 10
Number Buttons.
And if you mistype something, just enter the complete
3-digit wrong page number then enter the desired number
again. Or ... press one of the coloured teletext buttons so
that a page from Fastext/TOPtext is shown.
Hold Pages
again or
Some pages are divided up into subpages by the channel.
Subpages are automatically shown in turn, as they are
transmitted. In order to hold the page, press
again in order to display the next subpage.
Directly Select Subpages
You can directly select the subpages if required. You may use
one of two operations.
1. Press
shown. Enter 0 0 0 2. It can take a minute before
subpage 0002 appears.Press
order to switch off the subpage feature.
Or:
2. Wait a few seconds, and the right now available
subpages will be shown in the bottom line. Select
your page with
Enlargement
In order to enlarge the display, press
Either the upper or lower half of the screen is enlarged.
Each time you press
the upper or lower half of the screen or the full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed
answers.
Press
Stereo reception in analogue cable
TV channel mode
You can see the each signal type of STEREO,
Nicam Mono, and DUAL I/II, etc. on the TV-screen
when you press .
When 2-channel sound reception is available,
you can select your preferred audio with the
AUDIO I/II.
Each time you press AUDIO I/II, the sound channel
will switch to the alternative channel available.
Note:
•
In case of bad reception, the stereo sound also can be
intermittent.
•
The broadcast sound type may not be saved if powered
off.
in order to select subpage 2. 0 0 0 0 is
or .
you switch between the display of
in order to show the answers.
. Press
again in
.
Advertisement
Table of Contents
