5 General safety instructions DANGER Risk of electric shock This device has electronic parts operated via a power source (power supply and/or batteries). Im- proper use of this product can cause an electric shock. An electric shock can cause serious or poten- tially fatal injuries.
• Do not immerse the unit in water! • Protect the device from severe shocks! • For this device only use accessories and spare parts that comply with the technical information. • Use only the recommended batteries. Always replace weak or empty batteries with a new, com- plete set of batteries at full capacity.
1 LCD 2 SNOOZE/LIGHT button (snooze function and temporary bright display and projec- tion) 3 Projector lens (projection of current time 4 Projector arm (rotatable by 180 degrees) or alarm time) 5 Weather trend display with 3D holography 6 MODE button (time mode selection) effect / Perspex pillar (Red, green, white or blue light display depending on the weather trend)
1 Current time (hours) 2 Current time (minutes) 3 Snooze function enabled 4 Alarm enabled 5 Battery level (base station) 6 Current time (seconds) 7 Indoor temperature 8 Relative humidity (indoor) in % 9 Temperature trend (indoor) (rising, steady 10 Relative humidity (outdoor) in % or falling) 11 Selected channel for remote sensor 12 Temperature unit (°C or °F selectable)
4. Wait until the indoor temperature is displayed on the base station. NOTICE! For permanent operation, mains power supply is recommended. Alternatively a power supply with batteries is also possible. Proceed as follows: 5. Remove the battery compartment cover. 6. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct. 7.
9. Press ALARM button during the alarm time display to disable the alarm. The symbol will not be displayed. 12 Snooze function 1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will sound again in 5 minutes. 2.
Transmission range: 30 m 19 EC Declaration of Conformity Hereby, Bresser GmbH declares that the equipment type with part number: 7060100 is in compli- ance with Directive: 2014/30/EU.The full text of the EU declaration of conformity is available at the following internet address: http://www.bresser.de...
The regular warranty period is two years and starts on the day of purchase. To take advantage of the extended, voluntary warranty period specified on the presentation box, you must register on our web- site. Please see http://archive.bresser.de/download/warranty_terms/warranty_terms.pdf for all of the warranty conditions as well as information about extended warranties and services. 12 / 16...
Page 16
Teléfono*: +34 91 67972 69 Telephone*: +44 1342 837 098 BRESSER UK Ltd BRESSER Iberia SLU c/Valdemorillo,1 Nave B Unit 1 starborough Farm, P.I. Ventorro del cano Starborough Road, Nr Marsh Green, Edenbridge, Kent TN8 5RB 28925 Alcorcón Madrid...
Need help?
Do you have a question about the MyTime Crystal P Colour and is the answer not in the manual?
Questions and answers