decaWave DW1000 User Manual page 241

DW1000 User Manual
Revision v2.12
Page
All Update of version number to v2.12
61 To read OTP OTP_RDAT change 2A.04 to 2D:0A (see also 7.2.46.5) Row 5 removed.
106 New note on requirement for isolation of VDDPA1 and VDDPA2 if using Tx gain setting 000
128 Note added to point out that GPIO clocks have to be on to use GPIO lines.
132 Sec 7.2.39.3 GDM6 is declared as bit 15, but it is bit 14
133 Sec 7.2.39.4 GOP2 should refer to GPIO2 and GOP3 should refer to GPIO3
Changed the sentence to "The bits of the GPIO_RAW register identified above are
140
individually described below:"
157 PG_TMEAS changed to reg:2A:08 bit5:2, it was given 4:2
238 Addition of this table
© Decawave Ltd 2017
Change Description
Version 2.12 Page 241 of 242