Download Print this page

Advertisement

Advertisement

   Summary of Contents for Hitachi D 10SD

  • Page 4

    17. Avoid unintentional starting. Do not carry a plugged- GENERAL OPERATIONAL PRECAUTIONS in tool with a finger on the switch. Ensure switch is off when plugging in. WARNING! When using electric tools, basic safety 18. Use outdoor extension leads. When tool is used precautions should always be followed to reduce the risk outdoors, use only extension cords intended for of fire, electric shock and personal injury, including the...

  • Page 5

    SPECIFICATIONS Voltage 110V 50/60 Hz Power input 500 W No-load speed 1700/min Drill chuck capacity 10 mm Steel 10 mm Capacity Wood 25 mm Weight (without cord) 1.6 kg 6. Side handle attachment (Fig. 2) STANDARD ACCESSORIES Attach the side handle to the mounting part. Rotate the side handle grip in a clockwise direction to (1) Side handle ..............

  • Page 6

    If the drill stalls, release the trigger immediately, NOTE remove the bit from the work and start again. Do not Due to HITACHI’s continuing program of research and click the trigger on and off in an attempt to start a development, the specifications herein are subject to stalled drill.

Comments to this Manuals

Symbols: 0
Latest comments: