35mm Pole Stand – Supports loudspeaker above subwoofer equipped with pole socket; Tripod Stand – Supports loudspeaker from ground Covers Heavy-duty padded nylon transport cover with carrying handles Faceplate Optional custom-cut aluminum faceplate Online Information: bassboss.com/ccm112 Our proactive philosophy causes specifications to be subject to change whenever improvements are made. Page 4...
SET UP INSTRUCTIONS 1. Place loudspeaker in the desired location. Ensure that it is secure and stable. 2. Rotate the input attenuator knob counterclockwise to the lowest setting. 3. Connect signal via the XLR input jack. 4. Connect the amplifier module’s power supply cord using the blue PowerCon™ connectors. To insert, align the indexing tabs on the Powercon™ connector, insert it into the socket and rotate clockwise until the latch catches.
Contact your dealer or BASSBOSS support if the product is not functioning properly. BASSBOSS strongly recommends this product be installed by a qualified, professional installer who can ensure correct installation and certify that is is installed in compliance with the regulations in force.
BASSBOSS personnel. This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.
Need help?
Do you have a question about the CCM 112 and is the answer not in the manual?
Questions and answers