Alignment
Alignment
Site
Remote control
On screen displays
Initialising
Before you put your satellite system into operation, make sure that
there is free visibility between your system and the satellite positions
to the South, and that this visibility is not obstructed by trees or tall
buildings. This will save you time and trouble!
The control unit of the HDP 170 can only be operated together with
the satellite receiver UFD 540. The settings can only be made via the
receiver's remote control.
Please refer to the operating manual of the UFD 540 for information
about using the remote control –also the numerical entry via the nu-
merical buttons.
The button symbols for other operating functions are found in the
lower section of the on screen display.
For further help, press
The following message appears after the receiving system is switched
on:
.
7