Number Of Openings - Chamberlain 940EV User Manual

Programming
PROGRAM A TEMPORARY PIN - NUMBER OF OPENINGS
NOTE: This feature is not available on garage door openers that have a green Learn button or an external receiver.
A temporary 4-digit PIN can be programmed to allow access to visitors. Each programmed PIN can program one temporary PIN. The temporary PIN
can be set for a number of hours or a number of door openings. The temporary PIN cannot be the same as any previously programmed PIN.
1
Enter any programmed
PIN, then press and hold
*
the button until the
garage door opener light
bulb flashes 3 times.
2
Enter the temporary 4-digit
PIN of your choice, then
press the ENTER button.
The garage door opener
light bulb will flash 4
times.
3 Press the number of
openings the temporary
PIN will work (up to 255).
Then press the # button.
The garage door opener
light bulb will flash once.
4 To test, press the
temporary PIN, then press
the ENTER button. The
garage door opener will
activate. If the temporary
PIN was set for a number
of openings, the test will
use up one opening.
6