Cisco ASR-920-12CZ-A Configuration Manual page 8

Command or Action
Step 7
whitelist filename
Example:
Device(config-anra)# whitelist
flash:whitelist.txt
PID:A901-12C-FT-D SN:CAT1602U32U
PID:A901-12C-FT-D SN:CAT1604U92B
Step 8
no shut
Example:
Device(config-anra)# no shut
Step 9 exit
Example:
Device(config-anra)# exit
Step 10
exit
Example:
Device(config)# exit
Verifying and Monitoring Autonomic Networking Configuration
Procedure
Step 1
enable
Example:
Device> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2 show autonomic device
Example:
Device# show autonomic device
UDI
Device ID
Domain ID
Domain Certificate
ou=manual-cisco+serialNumber=PID:A901-12C-FT-DSN:CAT1602U00U,cn=0006.f6ac.3be0-2
Certificate Serial Number
Device Address
Displays the current state of an autonomic device including the global details.
Step 3
show autonomic neighbors [detail]
8
Purpose
(Optional) Allows loading a file on the local device that contains a
list of devices to be accepted in a given domain.
• The file must contain one UDI entry per line.
If this command is not configured, all devices are accepted
Note
into the domain.
Enables the autonomic registrar.
Exits registrar configuration mode and returns to global configuration
mode.
Exits global configuration mode and returns to privileged EXEC
mode.
PID:A901-12C-FT-D SN:CAT1602U00U
0006.f6ac.3be0-2
manual-cisco
(sub:)
04
FD8F:E354:CCF9:0:6:F6AC:3BE0:2