To enter a word, you can press a numeric key labeled with required
letters once to enter the first letter on the key, twice to enter the
second letter on the key.
If the letter you want to enter is on the same key as the previous one,
you can enter the latter one only after the cursor appears again or
after you press Right to move the cursor to the next space.
Example:
To enter "HUAWEI", do as follows:
1.
Switch to the upper case mode
2.
Press 4 twice to enter the letter "H".
3.
Press 8 twice to enter the letter "U".
4.
Press 2 once to enter the letter "A".
5.
Press 9 once to enter the letter "W".
6.
Press 3 twice to enter the letter "E".
7.
Press 4 three times to enter the letter "I".
Entering Text in Predictive Input Mode
In the
few seconds to switch between the upper case, initial capital, and
lower case predictive input mode.
To enter a word in the predictive input mode, perform the following
steps:
1.
Press the numeric keys corresponding to the letters of the word.
2.
Press Up or Down until the desired word appears.
3.
Press the Right/Left key to select a word and the cursor is on the
Right/Left of the word.
4.
Press 0 to select the word and enter a space after this word.
Example:
16
,
or
.
mode, you can press and hold # for a