Legacy Whirlpool LW 524 Owner's Manual page 69

Fusion Air Sound SyStem
Listening to devices
ENTER FM RADIO MODE
MODE
1. Press (MODE) on the remote control to switch to FM radio mode.
PAIR
2. Press (PLAY/PAUSE) to mute or unmute the audio.
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown
on the remote LCD.
FM radio is only available when you are in FM Radio mode. Scan or seek FM radio Channels.
SCAN OR SEEK FM RADIO CHANNELS
1. Press / (FAST REWIND/FAST FORWARD) to seek another station.
2. Press once /
SAVING RADIO CHANNEL TO MEMORY
To save the current frequency to memory, press and hold the
seconds. The station will be stored into relevant button.
LISTENING TO SAVED RADIO MEMORY
Press the , or
ADJUST VOLUME LEVEL
1. Press (VOLUME UP) once to increase the volume.
2. Press (VOLUME DOWN) once to reduce the volume.
3. Press and hold either
volume continuously.
DO NOT DIVE.
DO NOT DIVE.
(FAST REWIND/FAST FORWARD) to -0.05kHz or +0.05kHz to the frequency.
preset button once to listen to the station stored in that button.
or (VOLUME UP or VOLUME DOWN) to increase or decrease audio
(if equipped)
,
67
103
or for more than 2