Fusion Air Sound System (If Equipped) - Legacy Whirlpool LW 524 Owner's Manual

Fusion Air Sound SyStem
Remote COntrol Power & Syncing
WARNING – Never remain in your spa longer than 15 minutes per session when the water tem-
perature is above 98˚F. If you wish to spend more time in your spa, whether enjoying music, or
just lounging, be sure to keep the spa water at or below body temperature (98.6˚F).
WARNING – Prevent Electrocution. Do not connect any auxiliary/external components to the
system (i.e. cables, additional speakers, headphones, additional Audio/Video components, etc.).
HANDHELD REMOTE CONTROL CHARGING
The remote has a built-in Polymer Lithium rechargeable battery and comes with a charging cable.
Connect one end of the charging cable to the charging connection on remote control and connect
the USB end of the charging cable to any USB charger (5V DC) for charging. Be sure charging con-
nection is dry or allowed to dry before connecting to charge.
Make sure the remote has been charged before used. Do not leave remote under spa cover when
not in use. Always store remote in dry location when not it in use.
HANDHELD REMOTE CONTROL SYNCHRONIZING
The remote should already be paired from the factory, but if you need to synchronize the remote,
follow the steps below:
1. Make sure BlueCube+ Media Player is powered ON (red LED).
2. Put the remote within 20 inches (0.5 meter) of the BlueCube+ Media Player.
MODE
3. Press and hold
PAIR
the button.
4. Within 2 seconds, the LCD will show "Paired". If it fails to pair, the LCD will show "Retry
again". If this happens, wait 5 seconds and repeat steps above.
For any additional remote controls, you will also need to synchronize those remote controls to the
BlueCube+ Media Player.
If the pairing process is not successful, try again to put your remote close to the remote receiv-
er or charge the remote control if the battery is low.
Depending on the frequency of usage, the remote may drain its battery. Please charge the
remote before use. If the LCD shows nothing, the battery has been drained and will need
charging.
If you have lost or damaged your remote control and buy a new remote control, follow the
above steps to pair the new remote control.
DO NOT DIVE.
MODE on remote control untiI the LCD shows "Pairing in Progress". Re lease
(if equipped)
64