System Related Messages - Legacy Whirlpool LW 524 Owner's Manual

Spa Controls

System Related Messages

MEMORY FAILURE - CHECKSUM ERROR*
At power up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
MEMORY WARNING - PERSISTENT MEMORY RESET*
Appears after any system setup change. Contact your dealer or service organization if this message
appears on more than one power up, or if it appears after the system has been running normally
for a period of time.
MEMORY FAILURE - CLOCK ERROR*
Contact your dealer or service organization.
CONFIGURATION ERROR – SPA WILL NOT START UP
Contact your dealer or service organization.
A PUMP APPEARS TO BE STUCK ON
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your
dealer or service organization.
A PUMP APPEARS TO HAVE BEEN STUCK ON WHEN SPA WAS LAST
POWERED
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
* This message can be reset from the topside panel with any button press.
DO NOT DIVE. DO NOT DIVE. 109 57