Installing Accessories - Ryobi GD125 Operator's Manual

INSTALLING ACCESSORIES

See Figures 74-75.
The garage door opener can power a variety of AC and
DC accessories. For a complete list of accessories, visit
www.ryobitools.com.
WARNING:
Installing and removing accessories will require the use
of a ladder. Use extreme care when standing on a ladder.
Ensure someone is holding the ladder on the ground to
keep it stable. Failure to safely use a ladder can cause a
fall and result in death or serious personal injury.
WARNING:
Use only recommended accessories listed on our
website, in this manual, or in addendums. Use of
accessories that are not listed may cause the risk of
personal injury. Instructions for safe use of accessories
are included with the accessory.
WARNING:
Ensure accessories are properly and securely connected
to their port on the garage door opener. Failure to properly
secure the accessory can cause it to fall and could result
in serious personal injury or property damage.
For DC accessories:
 Select one of the accessory ports to power your DC
accessory.
 Hook the accessory to the top of the garage door opener
and insert it into the accessory port. Ensure the bottom
latch on the accessory is secured to the port on the
garage door opener.
NOTE: DC accessories will not receive power unless the
accessory port has been activated. See Using the Indoor
Keypad later in this section.
 Depress latches to release and remove the accessory.
For AC accessories:
 Remove accessory port covers on the left and right of
the AC receptacle.
 Insert AC accessory into the AC receptacle as shown.
 Secure the accessory in place by hooking it to the top of
the garage door opener and ensure the bottom latch on
the accessory is secured to the port on the garage door
opener.
 Depress latches to release and remove the accessory.
OPERATION
Accessory
Port # 3
42 - English
Hooks
Latch
Hooks
Latches
AC
Receptacle
Power
Cord
Fig. 73
DC
Accessory
Fig. 74
AC
Accessory
Fig. 75