Alfa Romeo MiTo 2013 Owner's Handbook Manual page 24

Check tyre pressure
This warning light (or symbol in the display) switches on (on some
GETTING TO
versions together with a message in the display) to indicate that the
KNOW YOUR CAR
tyre pressure is below the value recommended to guarantee long tyre
life and low fuel consumption. It may also indicate a slow loss of
pressure.
Should two or more tyres be in the condition mentioned above, the
SAFETY
display will show the indications corresponding to each tyre in
sequence.
Under these circumstances you should restore the correct pressure
values (see "Technical specifications" section).
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
20
Start&Stop system
activation/deactivation
(for versions/markets, where provided)
Start&Stop system fault
Start&Stop system activation
A message will appear on the display when the Start&Stop system is
activated.
The LED on the button (on the trim next to the steering wheel) is off
in this condition (see "Start&Stop" paragraph in this section).
Turning the Start&Stop off
❒ Versions with reconfigurable multifunction display: a message
appears on the display when the Start&Stop system is deactivated.
❒ Versions with reconfigurable multifunction display: the
and a message appear on the display when the Start&Stop system
is deactivated.
The LED on the button is on when the system is deactivated.
Start&Stop system fault
If the Start&Stop system is faulty the
display) or (versions with reconfigurable multifunction display)
symbol flashes on the display.
For versions/markets where provided, a warning message is also
displayed.
In this case, contact Alfa Romeo Authorized Services.
symbol
(versions with multifunction