Alfa Romeo MiTo 2013 Owner's Handbook Manual page 101

❒ move the seat belts to the side, making sure that they are correctly
extended and not twisted;
❒ lift the backrest retaining levers A fig. 65 and fold the desired
cushion forwards (a red band indicates that lever A is raised).
Repositioning the rear seat
Move the seat belts to the side making sure that they are correctly
extended and not twisted.
Raise the previously folded backrest until you hear the click of the
locking mechanism, visually checking that the red band on lever A fig.
65 has disappeared. The red band indicates that the backrest is not
secured.
Finally, reposition the head restraints, inserting them into their
housings.
fig. 65
BONNET
OPENING
Proceed as follows:
❒ pull lever A fig. 66 in the direction indicated by the arrow;
❒ pull lever B in the direction indicated by the arrow;
❒ lift the bonnet and, at the same time, release bonnet stay C fig. 67
from its locking device. Then, insert the end in housing D, making
sure that the stay is engaged in the smallest opening of the retaining
clip.
IMPORTANT Before lifting up the bonnet make sure that the windscreen
wipers are in the rest position and not operational.
fig. 66
A0J0082
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
A0J0085
97