Electrical Connection - BORETTI CAMPANIA Operating Instructions Manual

Consult the designs in the last pages referen-
ced in the text by alphabet letters.
Closely follow the instructions set out in this
manual.
All responsibility, for any eventual inconvenien-
ces, damages or fires caused by not comply-
ing with the instructions in this manual, is de-
clined.
Installation
Do not tile, grout or silicone this appliance
to the wall. Surface mounting only. Do not fix
chimney flue to furniture or fly over shelves un-
less the chimney flue can be easily removed, in
case maintenance is ever required.
Use an exhaust pipe with a diameter of at least
15 mm!!
Exhaust pipe
The cooker hood is provided with an upper air
exit (B) for discharging fumes externally (ex-
haust pipe not supplied). If cooking fumes and
vapours cannot be externally discharged, the
cooker hood can be used in the circulating ver-
sion F. The installation of charcoal filters allows
the recirculation of fumes and vapours through
the upper grid of the chimney.

Electrical connection

The electrical tension must correspond to the
tension noted on the label placed inside the
cooker hood.
Environmental
Regulations
Should you wish to discard the machine for any
reason, please comply with the following:
Take the machine to the local authorized com-
pany that collects discarded household appli-
ances. Correct processing enable valuable ma-
terials to be recycled in an intelligent manner.
Before discarding your machine it is important
that you cut off the power supply cord and re-
move it together with the plug. This machine
has been accorded the appropriate mark in ac-
cordance with European Directive 2002/96EG
regarding discarded electric and electronic
equipment. This directive determines the
standards for the collection and recycling of
discarded equipment that apply to the entire
territory of the European Union.
NL
FR
ES
EN
15