Care Information - GFW Regis Extending Console Desk Assembly Instructions Manual

REGIS EXTENDING CONSOLE DESK ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
INFORMATION
This product is intended for a maximum weight of 30 kg. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for
use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools are not included.
Assembly to be carried out by a competent adult only.
During assembly children should be kept away from the product due to possible risk of injury.
WARNINGS
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not sit or stand on the product.
It is essential that this unit is fixed to a wall with the fixings provided.
Wall fixings are included. If in doubt how to fit the fixings, please consult a qualified
tradesperson.Warning: Always ensure the area to be drilled is free from hidden electrical
wires, water and gas pipes.

CARE INFORMATION

Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product
FOR FUTURE REFERENCE.
Batch No.: WMI 141143
Page 2 of 12