Auto Erase Outbox; Default Call Back; Alert; Edit Signature - Pantech TX-95C User Manual

SETTINGS

2. AUTO ERASE OUTBOX

Press or press
1
2 Press .
Select "Disable" or "Old Outbox" with
Navigation key.
3 Press [OK].

DEFAULT CALL BACK

Edits a default call back number so that the recipient can call back or
reply.
1
Press or press
2
Press .
Input a call back number, then press

ALERT

Enables phone to alert you of an incoming message.
1 Press or press
C
2
H Press .
Select one from the Ringer/Vibrate/Silent/Ringer &
6
Remind/Vibrate & Remind with the Navigation key.
The Ringer & Remind or Vibrate & Remind rings or vibrates every
2 minutes to remind you of an incoming message. They will be
cleared when any key is pressed.
3
Press [OK].
110

EDIT SIGNATURE

Make signature as user wants.
.
1 Press
2 Then press
Select "Edit Signature" or "Insert Signature"
with the Navigation key.
3 Press
.

DIRECT VIEW

[OK]. 1
Press
2
Then press
Select "On" or "Off" with the Navigation key.
.
3
Press

ENTRY MODE

Sets an Entry Mode as a default. The T9 mode indicator will appear
whenever the input mode is activated if the T9 mode is the default.
1
Press
2
Then press
Select "T9 Mode"or "Alpha Mode" with
the Navigation key.
3 Press
SETTINGS
or press .
.
EDIT SIGNATURE : Edit user's signature.
INSERT SIGNATURE : Select whether the signature will be
included into sending message.
[OK].
or press .
.
ON : Set to read msg without entering inbox in SMS menu.
OFF : Set to read msg after entering inbox in SMS menu.
[OK].
or press .
.
[OK].
111
C
H
6