Hitachi CG 25SC Service Manual page 9

3. Disassembling the handle section
(1) Remove the eight Screws ST4 x 16 <1> from Handle (R) <2> and Handle (L) <13>. Remove the
Trigger <6>, Spring (A) <5>, Spring (B) <3>, and the Lock Off Button <4> as shown in Fig. 13.
(2) Remove the two Screws ST4 x 12 <11> from each of the two Cord Clips <12> to remove the Cord
<15> from the body.
Fig. 13
<3>
<1>
<22>
<2>
<23>
<4>
<6>
<5>
<8>
<9> <10>
<16>
<17>
<18>
<19>
<13>
<11> <12>
<20>
-8-
<15>
<14>