Walker H27i Operator's Manual page 31

Assembly Instructions
Tilt­Up Hook and
Latch Connected
Tilt­Up Tilt­Up
Latch Hook
Deck Secured in TILT-UP Position
CHECK
SHARPNESS, AND SECURITY OF MOUNTING
Tilt Bar
The blade mounting nuts on gear driven decks
should be torqued to 60 lb
mounting bolts on belt driven decks should be
torqued to 70 lb
required, refer to CHECKING/SERVICING for
Sharpen Mower Blades in
tions
.
ADJUST MOWER CUTTING HEIGHT, IF
REQUIRED
Refer to ADJUSTING CUTTING HEIGHT in Oper­
ating Instructions.
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.
MOWER BLADE CONDITION,
· ·
ft (81 N m) and the blade
· ·
ft (95 N m). If blade sharpening is
Maintenance Instruc­
27