Cleaning And Maintenance; Cleaning; Lime Removal (Self-Clean) - Beko SPM7128P User Manual

Cleaning and maintenance

4

4.1 Cleaning

WARNING: When
you
with ironing, unplug
A
the appliance. You
can drain the water
in the reservoir by
opening the refill lid
(6) and tilting the
iron to the front.
1. Unplug the appliance before
cleaning.
2. Wait for the appliance to cool
down completely.
3. Use a slightly damp cloth to
clean the outer surface of
the appliance. Then dry it
thoroughly.
4. Wipe the
residues on the soleplate (4)
with a slightly damp cloth and
soft, nonabrasive liquid cleaner
as necessary.
WARNING:
not use gasoline,
A
solvent and abrasive
cleaning agents or
hard brush to clean
the appliance.
Steam Iron / User Manual
are finished
sediments and
Do
4.2 Lime removal
(Self-Clean)
Lime removal function cleans the
lime particles accumulated in the
steam generator reservoir of the
appliance.
Use this function once in every
2 to 3 weeks. If the tap water is
very hard (if lime particles fall
down from the soleplate (4) of the
appliance), use the lime removal
function more frequently.
1. Unplug the appliance.
2. Refill the appliance with water
(see. 3.3).
3. Plug in the appliance and set the
temperature adjustment knob
(3) to max. position by turning it
in the clockwise direction.
4. When the thermostat indicator
light (11) turns off, unplug the
appliance.
5. Keep the appliance in a
horizontal position over the sink
and shake the appliance while
pressing and holding the lime
removal button (7). Continue
until the water in the reservoir is
depleted.
13 / 142 EN