Figure 3.19: Broadcast Enable Confirm/Deny Dialog Box; To Turn Broadcasting Off; Changing Your Switch Mode - Avocent AutoView 2000 AV2000BC AV2000BC Installer/User Manual

Figure 3.19: Broadcast Enable Confirm/Deny Dialog Box

5. Click OK to enable the broadcast. Click X or press
mands dialog box.
6. If broadcasting is enabled, type the information and/or perform the mouse movements you
want to broadcast from the user station. Only servers in the list are accessible.
NOTE: The other user is disabled when broadcast mode is enabled.

To turn broadcasting off:

From the Commands dialog box, clear the Broadcast Enable checkbox.

Changing Your Switch Mode

Your AutoView 2000 switch allows you to connect to attached servers using two methods:
Preemptive and Cooperative.
Select Preemptive (default setting) to allow any user to select any server at any time; a request from
another user disconnects the current user without warning.
-or-
Select Cooperative to maintain the current user connection; the current user will not be
disconnected if another user requests connection.
To access the Switch dialog box:
1. Press
Print Screen
2. Click Setup-Switch. The Switch dialog box displays.
. The Main dialog box will display.
Chapter 3: Basic Operations
to cancel and return to the Com-
Escape
33