Toro TimeCutter SW 4200 Operator's Manual page 28

1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes and
lights.
3. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees
4. Back the machine up the ramp
1. Back the machine up the
ramp.
5. Shut off the engine, remove the key, and engage
the parking brake.
6. Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes (Figure
regulations for tie-down requirements.
1. Tie-down loops
Unloading the Machine
1. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees
2. Drive the machine forward down the ramp
(Figure 25).
(Figure 24).
(Figure
Figure 25
2. Drive the machine forward
down the ramp.
26). Refer to local
Figure 26
(Figure 24).
25).
g028294
g027708
28