SBM B6 SX User Instructions page 3

THESE HEATERS MUST BE INSTALLED AND MAINTAINED BY A QUALIFIED INSTALLER
IN ACCORDANCE WITH THE CURRENTLY APPLICABLE SAFETY REGULATIONS AND
WITH THE SBM SX INSTALLER INSTRUCTIONS No. 05000048.
TO AVOID ABNORMAL MECHANICAL CONSTRAINTS ON THE RADIANT, IT IS
RECOMMENDED THAT IT BE CONNECTED TO THE GAS MAINS BY A FLEXIBLE TUBE.
TO BE INSTALLED IN WELL-VENTILATED PREMISES. NOT FOR DOMESTIC USE.
2.1 HEATER INCLINATION
WRONG INCLINATION
2.2 MINIMUM SAFETY CLEARANCES (INFLAMMABLE MATERIALS: 
HEATED
AREA
1m
min.
0.6m
min.(*)
(*) For minimum 20° inclination
2. SAFETY RECOMMENDATIONS :
HEATED
AREA
GAS SUPPLY
10 to 35°
CORRECT INCLINATION
2m
min.
1m
min.
10 to 35°
=70°C)
max
3