Advertisement
GARDENA Fountain Pump Set 500 S / 1000 S
Welcome to the Garden of GARDENA ...
Please read the Operating Instructions carefully and comply
with them. Use these operating instructions to familiarise yourself
with the pump, its proper use and the safety instructions.
For safety reasons, children under 16 as well as persons
not familiar with these operating instructions must not use this
pump.
v Keep these operating instructions in a safe place.
Contents
1. Where to use your GARDENA Fountain Pump set . . . . . . . . . 8
2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Storing your Fountain Pump Set . . . . . . . . . . . . . . . . . . . . . . 10
6. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Trouble-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Service / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Where to use your GARDENA Fountain Pump set
Intended Use:
The GARDENA Fountain Pump is intended for domestic use.
It is not designed for operating watering equipment and
accessories or irrigation systems. The pump can be used both
indoors and outdoors.
Please note
The GARDENA Fountain Pump is not suitable for continuous
operation in industrial applications. Corrosive, easily
combustible, aggressive or explosive substances (such as
gasoline, petroleum or nitro thinners), or saltwater must
not be pumped, nor must foodstuffs or drinking water.
2. Safety instructions
Electrical Safety:
DANGER ! Electric shock !
v Always disconnect the pump
from the mains before under-
taking any work on it.
The pump should be operated via a residual
current device with a residual current rating
of ≤ 30 mA (DIN VDE 0100-702). The pump
must be placed on solid, even ground.
8
v Please ask your electrician for his advice.
Mains power cables should not have a smaller
cross-section than a rubber sheathed cable
of the designation H05 RN-F3G0,75.
Extension cables must meet the requirements
of DIN VDE 0620. Check line voltage.
Data indicated on the type plate must match
technical data of the mains supply.
Please unplug the pump after operation and
before carrying out any maintenance works.
The pump must not be operated when there
are people in the water.
Swimming pools and garden ponds should
be designed according to international and
national design regulations.
v Please consult a professional electrician.
Before operating the pump, look to see if there
is any damage to the pump (esp. regarding
power cable and plug).
The connection cable of the pump cannot be
replaced. If the cable is damaged the pump
must be scrapped.
Do not use the power cable to carry the pump
or to pull the plug out of the socket.
3. Assembly
Fit the pump:
1. Screw the nozzle tube
2. Plug the nozzle tube
2
tube
3. Plug further nozzle tube(s)
required.
5
4. Plug the fountain socket
5. Insert the desired fountain insert into the fountain socket
a)
Cascade into a bayonet socket.
b) / c) Push in the Water Bell / Fleur-de-Lis until they click
audibly home.
4
3
b
2
a) cascade
Side outlet
1
Other features (e. g. a gargoyle) can be connected to the side
outlet of the nozzle tube
v The water quantity can be adjusted at the side outlet of the
nozzle tube
b
hole
Protect the power cable from heat, oil and
sharp edges.
User instructions:
Never let the pump run dry; running dry
generates heat and will damage the pump.
The temperature of the liquid used must not
be below 4 °C or above 35 °C.
Sand and other abrasive substances in the
liquid cause increased wear and reduce the
output of the pump.
Please observe the local noise prevention
regulations.
2
with side outlet into the socket
3
with regulating hole into the nozzle
.
4
3
into the nozzle tube
5
into the top nozzle tube
Only on the 1000 S
b) water bell
c) jets of water
2
:
2
[9 mm / 13 mm (1/2")] .
2
by adjusting the extent to which the regulating
3
of the nozzle tube
is covered by the side outlet
1
.
as
4
.
5
:
2
.
9
Advertisement
