WLAN Adapter Card
Chapter 2 Windows Installation Guide
2.1 Hardware Installation
PW-MN5275 has a 5-pin connector with USB 2.0 Interface, and it is mainly designed to provide
stability wireless function and performance for embedded system.
For installation, you must be sure to connect this module to your device or system with a
connecting wire first. Then, the promoted Found New Hardware Wizard will pop up if the Module
is installed correctly.
2.2 Software Installation
Take PW-MN5275 WLAN Adapter Card's XP driver for example as below:
1. First decompress the driver package to the local PC. The generated x86 directory is for XP
32bit, and x64 directory is for XP 64bit.
2. Click 'Update Driver...' to update the driver
4. Select 'Install from a list or specific location (Advanced)' and then click 'Next'