Chapter 1 Introduction
Thank you for choosing the PW-MN5275 WLAN Adapter Card!
1.1 Overview of the Product
The module is an IEEE802.11 a/b/g/n client device. It is mainly designed to provide a high-speed
and unrivaled wireless performance for wireless embedded system application. With a faster
wireless connection, you can get a better Internet experience without the cost of running network
With the 802.11n technology, the PW-MN5275 auto-sensing capability allows high packet transfer
rate of up to 300Mbps for maximum throughput. It has good capability on anti-jamming, and it can
also interoperate with other wireless (802.11 a/b/g/n) products. The module supports WEP, WPA
and WPA2 encryption to prevent outside intrusion and protect your personal information from being
With unmatched wireless performance, reception, and security protection, it is easily to be used in
different kinds of wireless embedded system for its size.
The PW-MN5275 is designed to be used inside consumer electronic products, such as TV,
Blue-Ray, Home Theater, etc.
It's a 2T2R product. So both of the antennas installed on the PCB will be in use at the same time.
Complies with IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n standards
Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption,
64/128-bit WEP encryption
Supports high rate of up to 300Mbps for maximum throughput, supports automatically adjust
to lower speeds due to distance or other operating limitations
Provides USB 2.0 interface
Good capability on anti-jamming
Supports roaming between access points when configured in Infrastructure mode
Ease to configure and provides monitoring information
Supports Windows XP, Vista, 7, Linux
WLAN Adapter Card