19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea Revision History Release Date Revision Initials 2012-10-11 First release.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea STATEMENT and Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea 「依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均 不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干 擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機 設備之干擾。」 This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and ...
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea This subsection does not apply for the geographical area Norway Implemented within a radius of 20 km from the centre of Ny-Ålesund Russian Federation None Only for indoor applications To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is tropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
PW-MN5275 WLAN Adapter Card Package Contents The following items should be found in your package: PW-MN5275 WLAN Adapter Card Conventions: The ‘Module’ mentioned in this user guide stands for PW-MN5275 WLAN Adapter Card without any explanation.
Note: The PW-MN5275 is designed to be used inside consumer electronic products, such as TV, Blue-Ray, Home Theater, etc. It’s a 2T2R product. So both of the antennas installed on the PCB will be in use at the same time.
(For PC) 2.1 Hardware Installation PW-MN5275 has a 5-pin connector with USB 2.0 Interface, and it is mainly designed to provide stability wireless function and performance for embedded system. For installation, you must be sure to connect this module to your device or system with a connecting wire first.
PW-MN5275 WLAN Adapter Card 5. Select ‘Search for the best driver in these locations’ and then click ‘Browse’ 6. Select the file which we decompress at step 1 and then click ‘OK’...
PW-MN5275 WLAN Adapter Card 7. Click ‘Next’ to start the driver update 8. Finally click ‘Finish’...
3.2 Software Installation For the Consumer Electronics products, the Linux Driver of PW-MN5275 is embedded in default. So the module is a plug and play device. After connecting the module to the device, PW-MN5275 will work well. 3.3 Pin Definitions...
PW-MN5275 WLAN Adapter Card Appendix A: Specifications Normal Interface USB 2.0 Interface Standards IEEE802.11a; IEEE802.11b; IEEE802.11g; IEEE802.11n Operating System Windows XP, Vista, 7, Linux Throughput 300Mbps (Max) 11a: up to 54Mbps(Dynamic) Radio Data Rate 11b: up to11Mbps (Dynamic) 11g: up to 54Mbps (Dynamic)