Chapter 2 Installation Guide; Hardware Installation; Software Installation; Overview - LG PW-DN427 User Manual

Chapter 2 Installation Guide

2.1 Hardware Installation

1. Connect one end of the USB cable to the Adapter.
2. Connect the other end of the USB cable to the USB port on your computer. The Adapter gets
its power from the host and there is no external power supply. The LED should light up when
the Adapter is plugged in and the PC is on.

Note:
The Adapter can also be plugged into the USB port on your computer

2.2 Software Installation

2.2.1 Overview

The Adapter's Setup Wizard will guide you through the installation of the Utility and drivers. Before
you install the software, please connect the USB adapter with your computer by USB cable. After
that, you will be prompted "Found New Hardware Wizard", click the Cancel button, and run the
Setup Wizard program on the CD-ROM.

Note:
The Setup steps for Windows XP/ Vista/ 7 are very similar, so the following installation guide
takes Windows XP for example.

2.2.2 Installation Guide

1. Insert the Resource CD into your CD-ROM drive, then go to My Computer to double-click
CD-ROM PW-DN427 3.0, and you will see the screen as Figure 2-1. Double-click Setup.exe
to start the installation.
PW-DN427 Wireless N USB Adapter User Guide
- 3 -
directly.