Table of Contents
Advertisement
S e t u p y o u r p h o n e
Carrier selection provisioning (CSP)
CSP functionality enables you to choose a preferred long distance carrier by
entering a carrier code. The carrier code default value is null. See ""Preferred
carrier," p. 56" 56.
Note: CSP function affects only long distance and international calls.
If CSP is active, a 2-digit preferred carrier code is displayed with the first digit of
the phone number entered. This code appears after you press the call key and
before you make the call.
1. Enter the long distance or international number you want to call, press the
call key, and verify that the 2-digit CSP code appears after the first digit of
the number entered.
2. Determine whether you want to turn the CSP function on or off. If you select
On, you will be prompted to change or enter the CSP code. If you select Off,
the CSP code will remain the same.
■ Answer calls
Answer or silence an incoming call
1. Press the call key to answer the call.
2. Press the end key or
Silence
answer the call, or do nothing, and the call is eventually diverted to voicemail.
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the call key. During the call,
all features function as normal. When you end the call or do not answer it, the
keypad automatically re-locks. See "Lock the keypad (keyguard)," p. 20 for more
details.
When the phone is locked, calls still may be possible to the official emergency
number programmed into your phone.
Adjust the earpiece volume
While in a call, press up or down on the volume key, located on the left side of the
phone, to adjust the volume of the earpiece.
18
to mute the ringing tone; then select
FCC DRAFT
Answer
to
Advertisement
Table of Contents
