Table of Contents
Advertisement
2. Prepare OT terminals.
3. Route the AC output power cable into the maintenance compartment.
4. Connect the AC output power cables and secure them using a socket wrench with an
extension rod.
NOTICE
Ensure that the AC output power cable is connected securely. Otherwise, the SUN2000 may fail to
operate or experience any fault that will cause the damage of the terminal block. For example, the
SUN2000 may generate heat during operation due to unreliable connection.
a. Three-core cable (excluding the
ground cable and neutral wire)
c. Four-core cable (excluding the ground
cable but including the neutral wire)
b. Four-core cable (including the ground
cable but excluding the neutral wire)
d. Five-core cable (including the ground
cable and neutral wire)
9
Advertisement
Table of Contents
