Table of Contents
Advertisement
TEST SETUP & TESTING
Note: The displayed values are factory defaults and should not be changed.
24. Press the "Return" soft key.
25. Verify that "Trunking Type" is set to "Message".
26. Press the "Call Type" soft key to enter the "Call Type" screen.
27. Press the "Private Call" soft key.
28. Press the "Simplex Duplex" soft key and "Simplex Call" soft key.
29. Press the "Signal Type" soft key and "Direct set –up" soft key.
30. Press the "Priority" soft key. Thereafter, enter "00" and press the "Priority" soft key.
31. Leave "Calling Party SSI" setting to default value
32. Press the "Return" soft key.
33. This completes the System Setup configuration
MTM700 Mobile Terminal / Basic Service Manual
NEIGHBOUR CELL BROADCAST:
BROADCAST INTERVAL:
NEIGHBOUR CELL CHANNEL:
NEIGHBOUR CELL LOCATION AREA:
NEIGHBOUR CELL IDENTIFIER:
SLOW RE-SELECT THRESHOLD:
SLOW RE-SELECT HYSTERESIS:
FAST RE-SELECT THRESHOLD:
FAST RE-SELECT HYSTERESIS:
NOT REQUIRED
10s
0000
00001
01
10dB
10dB
10dB
10dB
5 - 7
Hide quick links:
Advertisement
Table of Contents
