Frequency Programming - Motorola MTM700 Basic Service Manual

4 - 4
5. Press the OK button.

Frequency Programming

Carry out the following steps if you need to add or change the radio frequencies.
Note: Save your radio factory frequencies before you start programming by using (Menu
1. In the "Codeplug Tree" select "System Parameters".
For 380-430 MHz Radios
For 806-870 MHz Radios
2. Press the write phone icon.
3. Disconnect the radio from the programming kit.
Note: The new programmed frequencies of the radio are now available to be tested with
4. Press the "Right" navigation key.
5. Press the "1" key, and "Menu" key.
6. Press the "2" key, and "Menu" key.
7. Press the "3" key.
MTM700 Mobile Terminal / Basic Service Manual
After a successful writing, the message "The operation was successful" appears
on the computer screen.
Bar located on the CPS Application Window Screen) "File- Save as" (Your selected
File name).
• Click on "Frequency List".
• Click on "List No. 2".
• At the top of list 2, write the three frequencies which you have selected (the
following frequencies are for example only):
Rx 420.0125MHz (IFR 800)
Rx 425.0125MHz (IFR 1000)
Rx 429.9875MHz (IFR 1199)
Rx 851.0125MHz (IFR 2040)
Rx 860.0125MHz (IFR 2400)
Rx 869.9875MHz (IFR 2799)
the IFR or for any other use.
List1 and 2 frequencies are saved in the CodePlug and may only be accessed by
performing the following steps. When performing steps 4 thru 10, make sure that
you press the radio keys sequentially (less then a second between every consecu-
tive press):
PROGRAMMING THE RADIO