Table of Contents
Advertisement
PORTS & CONNECTORS
Remote control sensor
1
and Power Indicator
IR IN
2
AUDIO OUT
3
AUDIO IN
4
(LINE IN)
5
D-Sub (VGA IN)
USB port
6
HDMI IN
7
AC IN connector
8
9
AC SWITCH
16 | Display Components
1
2 3 4 5
Receives the signal from the remote control. See also
"USING THE REMOTE CONTROL" on page 18.
When the display is in active use the power indicator
illuminates GREEN. When the display is powered off it
illuminates RED. When a component failure is detected, the
indicator will blink RED.
Connects to an external IR sensor module to the display.
Connects to external speakers, audio amplifiers, etc. or
outputs the signal that is supplied to the AUDIO IN connector.
Connects with the audio out connector of a video source such
as a computer, VCR, or DVD player when the display is
connected to the source via the D-SUB connector.
Connects with the analog video output (VGA) of a computer
or other RGB equipment. This input can be used with an RGB
or COMPONENT source.
Connects to a personal computer or USB 2.0 device to
display digital media.
Connects with devices supporting audio/video data using the
digital HDMI interface.
Connects with the supplied power cord.
Switches the main power of the display ON/OFF.
6
7
8
9
Advertisement
Table of Contents
