Preparing Your Display For Use - Acer DT653 User Manual

Preparing Your Display for Use

1. Install in the desired location.
MOVING OR INSTALLING THE DISPLAY MUST BE DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if the display falls.
Do not mount or operate the display upside down, face up or face down.
When setting the display down to install the wall mount, place it face down on a flat and stable
surface covered by a protective sheet or cloth and a table cushion. DO NOT place the display
on an uncovered surface.
2. Make connections.
(See "Connecting Devices to Your Display" on page 22)
3. Plug the supplied power cable into the display and a power source.
Please refer to the "Safety Information" on page 5 of this manual for proper selection of AC
power cord.
CAUTION
CAUTION
IMPORTANT
NOTE
Preparing Your Display for Use | 19