Cleaning & Care - Westinghouse WBL201 Series User Manual

CLEANING AND CARE
1. Remove jar from the power base and then remove blade assembly from jar. Rinse
with warm water to remove any large food particles.
2. Fill jar half way with warm, soapy water.
3. Twist the blade assembly back onto jar. Replace jar on power base and turn the
blender on for a few seconds.
4. Remove the jar assembly from the base and rinse well. Repeat procedure as
necessary.
IMPORTANT: Do not use boiling water. The blade assembly bearings have been
designed with a lifetime lubricant; exposure to boiling water may
damage these bearings and shorten the life of the blender. Use of
boiling 10 water could also cause excessive steam buildup, which may
result in personal injury.
The power base may be wiped with a clean, damp cloth or sponge.
CAUTION: Do not immerse the power base, cord or plug in water or any other liquid.
Do not use harsh detergents or abrasive cleansers on any part of the
blender or accessories.
Blending jars, blade assembly and travel lids can be washed in warm, soapy water or
placed on the top rack of a dishwasher. Rinse and dry thoroughly before use.
WARNING: Be sure to handle the blade assembly carefully; blades are sharp.
Page 9