Pulse Blending Techniques - Westinghouse WBL201 Series User Manual

Smoothie blender
Table of Contents

Advertisement

SET UP & USE
PULSE BLENDING TECHNIQUE
Use this technique when short bursts of high power are required. It is ideal for
chopping when a chunky texture is desired.
Holding the power base with one hand, turn the variable speed dial to PULSE (P)
position and hold for a few seconds. Release, then repeat until desired consistency is
achieved.
NOTE: Do not run the appliance for more than 1 minute at a time. Allow unit to rest
for at least 3 minutes between maximum blending cycles.
BLENDING TIPS AND TECHNIQUES
• Always attach the blade assembly to the jar/cup before placing on the power base.
• If ingredients being blended become stuck around blades or on sides of jar, turn the
variable speed dial to the OFF ( ) position, lift jar off of power base and shake to
loosen food.
• When blending or chopping solid foods, such as raw vegetables, cooked meats, and
fruits, always cut into pieces no larger than 1 inch before placing in the jar. Blend no
more than cup (125 mL) of these foods at a time. This will speed up the process and
reduce wear on the blades and motor.
• The Blender is not designed for crushing ice alone, but can be used for preparing
frozen drinks. Most store-bought blender drink mixes and/or other recipes will note
a requirement for water or other liquids. Ice will not crush without some form of
liquid. Add 1/2 cup (125 ml) of water for every 1-1/2 cup (375 ml) of ice.
• Smaller ice cubes can be chopped or crushed faster than large ones.
• If too much food is blended/chopped at one time, the motor may stall. If this
happens, turn the blender off, remove a portion of the food and repeat the blending
process.
• Chill the jar in the fridge before blending frozen drinks. This will help retain a cooler
temperature.
• Avoid over-blending. Usually, you will only need to blend for a few seconds, not
minutes. Over-blending may cause food to be mushy.
• Be sure the motor is completely stopped before removing the jar from the power
base.
• When using the blender to prepare drinks, use the travel lids after blending to
eliminate extra dishes.
• The travel lid allows you to blend and store beverages in the same cup.
Page 8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents