ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver
Step 1
Inserting the left handlebar frame (02) to the left side of the base bracket
(04) , Through the holes with two M8 carriage bolt (30)and two M8 Washers
(35) , then secure the bolts with 8mm nylon nut (38) with 8 mm open end
wrench .
And repeat for the right handlebar frame (03) to be installed on the right side
of the base bracket (04) and put through two M8 carriage bolt (30) and two
M8 Washers (35) , then secure the bolts with 8mm nylon nut (38) with 8 mm
open end wrench .
Hardware:
(#35) Flat washer
(#38) Nylon nut
(#30) Carriage Bolt
4 PCS
4 PCS
4 PCS
9