3
Using your machine
The appliance was designed to be used in houses,
and is not fit for industrial use.
Preparation for Use
Fill 1,5 liters of water into the container. The water
level should not exceed the "MAX" level indicated
on the container. Fit the air distributing part by
sliding it into its slot located on the container. Put
the water separator on the container and place
the HEPA filter on top of it. Place the motor unit
on the container and secure it by locking the
container locking/unlocking parts on each side.
Connect the hose to the inlet socket located on the
container. Attach the extension tubes, which have
been mounted to each other, to the hose handle.
You can connect only one extension tube instead
of two tubes or you can attach the accessories
directly to the hose handle without using any tube.
7 / 9 EN
Vacuum Cleaner With Water Filtration / User Manual