Tandy 1000 Basic Reference Manual page 385

Awwendix B
ASCII Character Codes
The previous table listed the ASCII codes (in hexadecimal) gen-
erated by each key. The following table lists the characters gen-
erated by those ASCII codes. (Note: All ASCII codes in this table
are expressed in decimal form.)
You can display the characters listed by doing either of the
following:
0
Using the BASIC statement PRINT CHR$(code), where code is
0
Pressing and, without releasing it, typing the ASCII code
For Codes 0-31, the table also lists the standard interpretations.
The interpretations are usually used for control functions or
communications.
Note: The BASIC program editor has its own special
interpretation of some codes and may not display the
character listed.
the ASCII code.
on the numeric keypad.
383