Tandy 1000 Basic Reference Manual page 373

Chapter 12 I Error Messages
~~
Number
61
62
63
64
66
67
68
Message
Disk full
All disk storage space is in use.
Input past end
BASIC executed a n INPUT statement after all the
data in the file had been read, or BASIC executed
a n INPUT statement to a null (empty) file.
To
avoid
this error, use the EOF function to detect the end-
of-file.
Bad record number
In a GET or PUT statement. the record number is
e i t h e r g r e a t e r t h a n t h e m a x
(16,777,215) or equal to zero.
Bad file name
An illegal p a t h n a m e was used
SAVE, KILL, or OPEN statement
m u m allowed
with a LOAD,
(for example, a
filename with too many characters).
Direct statement in file
Information in a non-ASCII format was encountered
while LOADing a n ASCII-format file. The LOAD is
terminated.
Too many files
The diskette already contains the maximum num-
ber of files allowed. This usually occurs on SAVE or
OPEN. An attempt was made to create a new file
(using SAVE or OPEN) when all directory entries
are full.
Device Unavailable
An attempt was made to open a file to a non-
existent device.
It
may be that hardware does not
exist to support the device, such as LPT2: or LPT3:,
or that the device is disabled. This occurs if an
OPEN "COM1:
...
statement is executed but the user
disabled RS232 support via the /C:0 switch direc-
tive on the command line.
371