Advertisement
Tighten Attachment Screws to Secure the Angle Stand on the Maestro
The Fixed Angle Stand M4 attachment screws should easily screw into the mounting screw holes on the
back of the Maestro with little to no effort. If this is not the case, the screw may be cross threaded. Do
not force the M4 attachment screw into the mounting screw hole to prevent striping of the M4
attachment screw or the metal screw hole insert.
After the M4 attachment screws is completely installed, tighten it snugly, but do not over tighten it.
Repeat this procedure the remaining two (2) M4 attachment screws.
Below shows an image of the completed stand installation.
Page 7
© 2016 FlexRadio Systems, v1.0.0
Advertisement
