Directional Casting Steps - Lowrance FishHunter 3D/PRO Operator's Manual

Directional casting steps

1.
2.
3.
4.
5.
6.
7.
8.
34 |
Select Directional Casting*.
Set range to the depth you are fishing in and click the
arrow.
In 5 Transducer view each circle represents one of five
transducers on the bottom of your sonar.
If one of the circles is red, it means fish have been
detected below that transducer with their depth.
You can select any transducer on the screen to get the
bottom contour by pressing on the circle.
You can view a split screen of the bottom contour and
5 transducers by clicking on the arrow. Click the arrow
again to return to 5 Transducer view.
Cast your line towards the area of the sonar that keeps
lighting up red on your screen to catch more fish.
To adjust where the front of your sonar is facing select
the rotation button on the screen.
You can switch between Raw View and Fish View from
the top menu.
Coverage and modes | FishHunter 3D/PRO Operator Manual