Lowrance FishHunter 3D/PRO Operator's Manual page 11

your coverage area.
3.
Ensure you have charged your FishHunter for minimum
of 4 hours before first usage.
4.
Attach your FishHunter to the braided line on the end
of your fishing line or tether it to the red leash that was
provided in your box. Tether it by threading the red leash
through the tow point on the front of your FishHunter
or by attaching the line tying clip onto the front of your
sonar and the end of the red leash provided.
5.
Drop the FishHunter into the water.
6.
The sonar will automatically turn on when placed in
water and will begin slowly flashing red from the top of
the sonar. If you don't see any lights then the FishHunter
is not charged.
7.
Open your Wi-Fi settings on your smartphone or tablet.
Refresh the list and select FishHunter Wi-Fi XXX.
¼ Note:
8.
Wait for your phone/tablet to tell you that you are
connected to FishHunter Wi-Fi. You will see a check mark
on your Wi-Fi settings to show you are connected.
¼ Note:
errors. Ensure their Wi-Fi settings are turned off.
9.
Once connected, open theFishHunter app and go to the
Sonar section.
Overview | FishHunter 3D/PRO Operator Manual
It may take up to 1 minute to appear.
Other phones or tablets can cause connection
| 11